Month: August 2023

Droitwich Spa…

Our first call of the week was for work on Matt’s 80th Anniversary TF 160 in paint code MBB. The car hadn’t run in 4 years, what with Covid and house moves etcetera, so Matt was keen to get her back on the road again.

Cambelt, water pump, tensioner, spark plugs and all filters changed for him, along with alternator belt, brake fluid change and fitting of rear discs and pads. (Matt had done the fronts). Lovely to meet him and have a chat. He’d first seen us working on a car when we had carried out the head gasket on Verity’s Steppy, quite a few years ago now, outside a hotel in Bromsgrove when the Pride of Longbridge event was cancelled due to bad weather.

Really great to see Steve Cotton too, having just recently moved around the corner, who popped over to say hello.

Diabolical weather all the way down this morning, but fortunately it stayed mainly dry while we were working.

We said our goodbyes to Matt and headed a few miles along the road to our digs for tonight. He’s looking forward to getting the car MOT’d and getting out and about on some runs, no doubt with his neighbour at some point who we’re sure will have some plans afoot! – https://ift.tt/rY359xv

Back to it, after a fantastic long weekend away at Pateley Bridge for the Harrogate MG Club show and fun with friends, Tuesday morning found Jon back at the workshop for a few things. Then we were back on the road for the rest of this week.

Wednesday found us in Lincoln, with the first call of the day at John’s, for a full cambelt service on his TF 135 (one of the post LE 500 run cars). We resorted to our Plan C as one of the engine mount bolts sheared off, fortunately we always carry a spare mount in the event of this happening to save on a return journey. Replacement mount fitted and all good to go again. Nice to see John and thanks to Lynn for the bag of snacks.

We then headed a couple of miles along the road where it was good to meet William, and have a chat while we worked, undertaking full cambelt service on his ‘01 TF 135 in paint code LEF.

From there we headed another few miles along the road to Michael’s, where it was good to meet him too, for minor service and brake fluid change on his 2011 TF 135, another post LE 500 run car in paint code 291. The car had a very nice stable mate, a Morgan Plus Four that Michael and his wife will be touring Europe in this summer. Forgot to get a pic unfortunately, though we did get to have a sit in it, what a beautiful car, I can imagine they will have an amazing trip. We also had some friendly feathered neighbours while we worked.

Thursday found us over in Barnsley for work on an ‘01 MGF Freestyle in paint code CMU, that had been parked up for a couple of years. Initially booked in for brakes all round, we found that they were all like new. One of the rear calipers needing freeing off. The alternator was shot, so we replaced this. The suspension pumped up to the correct height. We then found that the cambelt service was due so we carried this out, plus we gave the car a check over prior to it going in for the MOT. Lovely to meet Charles and Denise. Charles is looking forward to getting the car back on the road and taking his granddaughter out for a spin!

Today, Friday, found us on our first call of the day in Stockton-on-Tees, where it was good to meet David for work on his MGF 120 mpi in paint code CAQ.

Head gasket replacement and cambelt service carried out for him and the car is all sorted for him. The gasket had gone in cylinder number 3 that had been nicely steam cleaned.

Then from there we headed over to Loftus, where it was lovely to see Karl, as always, for cambelt service on his ‘04
TF 135 in paint code MBB. Where did the last 4 years go?! Good to have a chat with him before we headed home.

So good to have a welcome change in the weather, let’s hope it stays like this for a while. Have a great weekend everyone wherever you may be. ☀️ – https://ift.tt/rlWowpg

Harrogate MG Club – Annual Show 2023

Nidderdale showground, Pateley Bridge.

Always a fantastic show, the rain thankfully held off for this years event, with a decent turnout of cars from around the country.

Really great to see so many friends and have good catch-ups with everyone from far and wide.

The Dave Challis Jazz Trio were brilliant at entertaining us all as they roamed around the showground playing their instruments, including a serenade too!

Great to have Maggy as a neighbouring stall holder with her fantastic crafts ‘Burn Baby Burn’.

Some fab cars on show, I did manage to have a wander and take a few pics.

Big thanks to Maureen and Colin and the team of organisers for hosting another successful and enjoyable event. We look forward to next year. – https://ift.tt/acnGvmk

Our last job of the week was up in Hartlepool, yesterday, for work on Andrew’s ‘03 TF 160 (originally in paint code LEF).

As Andrew used to paint cars for a living he transformed the look of this car with a ‘Renault red’. We had previously seen a photo when he’d popped it on our Facebook page, but it looks absolutely amazing in the flesh, a really stunning finish to it.

He’d got in touch a few months ago as he’d noticed that it was showing signs of the head gasket having gone. The cambelt service was also due, so this was carried out for him along with replacing the head gasket.

While we were there he asked if we could fit the Toyo exhaust manifold and flexi section that he’d had sat in the garage for a while. Originally meant for an MGF the Lambda sensor fitting had to be adapted to make it fit.

On firing up we found we only got decent heat to the heaters on a few revs, and also the coolant temperature wasn’t going up or down as it should. This was all caused by a blocked oil-cooler, restricting the flow to the back of the thermostat. Bypass put in place and car running up to temperature as it should.

Andrew also asked us to fit a replacement alternator on his wife’s ‘04 MG TF 115 (in paint code CBT) as that had been out of action for a while too.

Happily, both cars back up and running again for them.

A long, but really good, day meeting and chatting to Andrew, while we worked, who provided us with a welcome flow of tea!

A good way to round off a busy week, now time to enjoy a couple of days off, I wonder where that will take us. 😄 – https://ift.tt/pkVncfT

Busy few days at Norris Garage…

We got cracking first thing on Sunday morning with the gearbox swap on Mick’s MGF 1.8 mpi as planned. The heat shield over the back box had come adrift, so new brackets were fitted, which involving removing the old captive nuts and welding in new threaded sections to support it. Good to see Mick and Sammy as always when they came over on Tuesday afternoon to collect.

Dave came over from Hull on Monday with his ‘04 TF 115 for a check over. The expansion tank was blown so we got one ordered in and fitted it for him today. Really good to see him and have a chat, plus he came armed with a box of Jaffa cakes!

Head gasket replacement also carried out on Neil’s ‘05 TF 160 (in paint code JFV). Great to see him and Barbara today when they came over from Colne to collect.

Matthew came over from Seaham in County Durham on Tuesday morning in his ZT 160 V6, that he’d recently acquired from his father, for a health check. Really good to meet him and have a chat.

Lovely to see David and his wife for a chat and a cuppa when they came over to collect his TF after its clutch and head gasket replacement.

Stephen dropped off his MGF 1.8 mpi (in paint code CAQ) that he’d recently purchased from Matthewson’s.

A few things sorted for him; hydragas lift, emergency access code and central locking repaired, slave cylinder replaced and clutch-release arm eased off, drivers side sill repaired and alternator cover fitted. So she’s all good to go for him to enjoy having days out in with his wife. Lovely to meet him and his son Simon and grandson.

An early start this morning, when it was great to meet Gary who came over from Goole in his recently purchased ‘06 TF 115 (in paint code CEV) and wanted us to check it out to reassure him he’d not bought a bad one, having only seen a couple of photos of it. Far from it, the car has a very low mileage is like new. How did however want the underfloor pipes replacing with stainless, which is always a good move. Minor service carried out too and the car is good to go for him to
enjoy.

I think I’ve remembered everything…

Oh yes that was it, we were also asked to sort the head gasket on a rally car, when we had a chance. So we got cracking on that yesterday afternoon, unfortunately, on removing the head it has a fair amount of fire-ring damage so has been sent away for skimming. More on that one later. Fab car though and would love a blast when we’ve rebuilt it!

More developments also on Mik and Sarah’s MGF that has been in with us for investigation of non-running, pleased to say we’re almost there with it, few more tests to do and full report later.

Wish this grotty weather would sort itself out, everyone is a bit fed up of it now, fingers crossed it clears and all the car shows planned don’t get cancelled this coming weekend. 🌧️ – https://ift.tt/PSiV6Wp