Category: News & Updates

Had a few things to get sorted at the workshop this morning…

Andrew had come over from Walkington at the weekend to leave his TF 135 with us for its annual service and MOT, a couple of days before had developed a problem with the alternator, so this was swapped out for them with a new one fitted, along with new belt. The MOT was a pass at the station we use on site, so all ready for Andrew to collect at the weekend.

Eddy drove down from Seaham to have a new key fob supplied and programmed on his 2004 TF 135, (paint code JFV) as he only had the one fob. Great to meet him, bit of a story with this one that he shared with us. Date booked in for next year for the cambelt service and a remap when we look forward to seeing him again.

Tony and his lovely wife came over from Hull for hydragas pump up on their V reg MGF 1.8 mpi (paint code JRJ). We’ve seen the car a couple of times before for pump up and replacement of one of the spheres, but hadn’t realised how they came about owning the car. It was a Bangers & Cash auction win! The ticket was a fiver and they couldn’t believe it that they’d won, Sarah Crabtree (Jon’s old mate) rang them herself to give them the good news! Isn’t that great. They love the car and have loads of fun in her. Good to see them both again and have a chat.

Van booked in at Pickards for its new clutch, or whatever it is that’s needed, next week.

Then that’s us done now for a few days. – https://ift.tt/AZmTea6

That’s part of the rearranged trip from last week done, which started with a very early departure on Wednesday morning…

Full cambelt service carried out on Roger’s 2011 TF 135 aka N-series, paint code 288, in Newbury. All went well, no awkward bolts. We’d taken a control arm with us, as it had come up as an advisory on the first MOT, but then on the follow-up test it wasn’t advised on, on inspection it was in good order so Roger said to leave it for now.

Thursday was a busy day, with our first call in Shinfield for minor service, replacement of the slave-cylinder on Simon’s Y reg MGF VVC, in paint code HFF. Good to Simon again, briefly, in between his meetings.

We then went over to Finchampstead for minor service and replacement of the underfloor coolant pipes on Frances’s 2004 TF 135 (paint code MBB). Thanks to his wife for especially baking Jon some muffins!

For the last call of the day we were only another 2 miles along the road to Nick’s house for minor service and check over on his 2004 TF 135 (paint code MBB), the only other things required were some HT leads as his were a bit on the tired side. Nick’s carried out a lot of work himself since buying the car in June. Didn’t get to meet him as he was at work.

Friday morning found us in Andover for work on Paul’s latest acquisition. He’d bought himself another doer upper, a MGF 1.8 mpi in paint code COF. Full cambelt service carried out, alternator belt and a replacement throttle pedal fitted. The throttle cable had been replaced, by the previous owner, with an aftermarket one, but was still stiff as at some point, during its installation, it must have been kinked causing more resistance than is acceptable.

Bit of a delayed start to proceedings as previous owner had fitted awful spline bolts to the engine cover. Eventually removed and subsequently replaced with the correct bolts.

Good to see Paul again, when he came back from work, and have a catch-up, whom we’d last seen when we’d done a load of resto work on his then Abingdon some years ago.

We should have been over in Farnham too, fitting some headlights on Robert’s MGF, but a miscommunication in who was actually buying the lights! Not to worry, we’ve a date booked in when we return for the next part of this trip.

So that brings us to yesterday, Saturday, and we went over to Bramley, near Guildford for work on James’s TF. A 2004 135 (paint code IAU) that we’d last seen five years ago for quite an extensive list of work.

Full cambelt service carried out for him this time. Shame not to see James as he was working, but we met and had an interesting chat with his good friend Tom. It was nice to see the car again, which is still in fab condition.

We stayed over in Newbury for 3 nights and were in Fleet last night. Two very good lodgings.

Heading back up the M1 now with a call in to the workshop to swap vans, as the ‘interim’ van we’ve been using developed a problem with the duel-mass flywheel as we set off for this trip, so we’ve limped it along. Its served us extremely well so it will be booked in to have that replaced. It’s the first problem it’s had in the 25,000 miles (once around the world) we’ve done in it about 6 months!

Our regular van is sorted, but we didn’t want to use it straight away on a big trip like this, we’ll just run it about ‘locally’ for a while.

Had an earlyish finish one day we so being nearby we visited ‘Downton Abbey’. Jon’s leg has been bearing up fairly well considering. – https://ift.tt/SDfNLWU

It’s been a long time since our last post and I know some of you are wondering why we’re so quiet.

Jon’s lovely Mum, Brenda, very sadly passed away on Sunday morning. She was a truly wonderful person and will leave a huge dent in many peoples lives. The family are going through the tough process of dealing with this and pulling together as she would have wished.

Our trips to the south coast and Berkshire this week, and Norfolk next week have all been rearranged, I would like to say thank you to everyone for your support and understanding at this very difficult time.

Jon is also not in a good way himself, as has been diagnosed with a DVT this week. He’s on medication and all under control, but he’s obviously feeling very sore in many ways. We hope to return to work as planned next week, but will have to see how things go.

Again, thank you to all concerned for your understanding. – https://ift.tt/ZucgL5P

Back to it and our first job of the week was at the workshop on Tuesday morning, where it was great to meet Kjeld and his wife, who live in Denmark and who were on another trip of the UK, this time taking in the NC500.

Cambelt service carried out for them on their MGF 120 mpi (paint code CMU). Really lovely to have a chat with them before they headed on their way to their next stop-over in Penrith.

Wednesday morning found us over in Husthwaite, near York, for a full cambelt service on Mark’s MGF 120 mpi (paint code HAM). Great to meet Mark properly, who had popped over to say hello while we were at Pateley Bridge at the weekend.

From there we headed over to Chapel Allerton for hydragas pump up on Tony’s ‘01 MGF (paint code CDX), it was right down on its stops, so much so the MOT station had recorded a modified suspension system! At least he can now get back for the repeat test.

Thursday morning and back at the workshop. Mik brought over his wife’s MGF 1.8 mpi, known as ‘Tess’ for the MOT. The minor service was deferred until next year as they had only done 400 miles since the service last year. Date booked in for this and the MOT for 2025.

The second job of the day was cancelled last minute, too late to book anything else in, which is a shame. I did try, but it was too short notice for folk. Jon cracked on with some welding on one of our doer-uppers. I got caught up on a ton of admin at least.

That brings us to today, Friday, and we had the day in Lincolnshire. Our first call was on James’s ‘04 TF 1.8 (paint code MBB) for minor service and a check over. Great to meet him and have a chat before heading off to our next call a few miles along the road to John Ponting’s house.

John’s ‘09 post LE 135 was due for its minor service, plus he was experiencing some issues with his clutch, so this was investigated and nothing untoward found. Couple of other bits sorted for him. Good to see John and Lynn, have a chat and a cuppa with him before heading on our way. Thanks to John for the huge box of Jaffa cakes!

As we were just around the corner from Rimmer Bros we popped in for some parts and to return a few bits. Always nice to see the chaps in there.

Our last call of the day and of the week was in Somercotes, near Louth, for work on Mark’s MGF Stepspeed (paint code JBH).

Having been stood in the garden for quite some time Mark wanted to get the car back on the road.

Minor service carried out, underfloor coolant-pipes replaced with stainless steel ones, hydragas pump up, oil gauge replaced, rear lightbulb-holders replaced, plus bulbs, and a few other bits fettled. Date booked in to return to replace the rear window and to carry out the cambelt service, that we found out later was overdue, not by much, but all the same needs doing.

We didn’t meet Mark as he was working. It’s good to see that he’s investing in keeping this fab car on the road.

So, there we are, first week back at it and the weather has been pretty good too. Have a great weekend everyone wherever you may be, hoping the good weather stays with you all for some fun in your MGs. 🌞 – https://ift.tt/cg6YXqT

Harrogate MG Car Club – 2024 show at Pateley Bridge, Nidderdale – Sunday 5th August.

The weather was good and the turn out of cars was good too, but even better it was great to catch-up with so many lovely people throughout the day.

It’s a massive shame that the camping was spoilt by some stupid folk a few years ago, otherwise there would have been many more people to catch-up with, as it is such a good show in beautiful surroundings, with lots going on.

We had a couple of cars to sort, Rachael and Tony’s TF was having an issue, which is still to be resolved. Patrick’s MGF had sprung a slight leak, this was duly resolved for him.

We stayed over with our friends Maggy, Phil & Peppa dog (well done to her with awards in her classes in the dog show) in a quaint self-catering house on the high street, sadly not joined by our pals from South Wales, Jan & Andy, as their puss Poppy was unwell.

Once we know the date of the show for 2025 we’ll publish it on here, as it’s really worth going to and needs continued support before it, like so many other shows, will cease to exist.

Not much time to take a lot of pics, but here’s a few.

Check out the Harrogate MG Car Club Facebook page for more information. – https://ift.tt/xGoSt0d

Thanks Greece, you’ve been an absolute blast and given us much needed R&R for 12 amazing days! 🇬🇷

We arrived back home late last night and then back at it today with a visit up to Durham to check out a possible oil leak on Luke’s P reg 1.8 MGF. We’d replaced the cam oil seals a couple of months ago, fortunately these were fine and it was just a bit of residual oil that had made it down.

Shame not to see Luke this time as he was at work, we’d gone as a squeeze in anyway, but nice to have a quick catch-up with Deborah.

So back to reality now and busy busy… 🛠️ 🔩 ⚙️ – https://ift.tt/4CSuE6c

We made a decision a couple of weeks ago to book a holiday, everyone was telling us that we needed it, yes I guess we were both starting to look a bit ragged! 🥴

Our last hol was two years ago in Greece, on the island of Crete, so we thought yep let’s just head back there to same place and have some R&R. We arrived late Saturday night/Sunday morning, after a bit of a delay in the flight, but just glad to be here. 🏝️

I’ve been doing a daily check in on the admin and replying to our enquiries, and will continue to do so whilst out here. Unfortunately, can’t reply to any messages sent on landlines, so if you can wait until we’re back in the UK or resend via your mobile number where possible.

Efcharisto! 🇬🇷☀️ – https://ift.tt/XREscVn

Friday again and we’re heading north and back home now, following a busy few days in the south…

Tuesday morning found us in Corby for a hydragas pump up on Rob’s 2001 MGF. Good to see him again and have a quick catch-up before heading on to our digs for the night in Bromley.

A nice short commute on Wednesday morning over to Beckenham for work on John’s other two cars.

Full cambelt service carried out and replacement of the underfloor pipes for stainless ones on his N reg, very low mileage, 120 mpi (paint code COF).

Next up was his other MGF (in paint code COF) 1.8 mpi, registered 1997. Full cambelt service also carried out on this one. Both cars great to work on, no awkward bolts or things in wrong places. Hydragas pump ups done on both cars too, so John’s all good to go on all three of his cars now and can enjoy getting them out and about.

After another stay over in Bromley, on Wednesday night, we had an even shorter commute on Thursday morning, just a few miles down the hill to Michael’s house for work on his V ref MGF VVC (in paint code HFF) that he’s owned now for the past 20 years. The cambelt service was a little overdue so we undertook this for him. Michael has been doing the routine servicing on the car over the years himself. So the car is all now up to date for him to enjoy, with peace of mind. It was lovely to meet him and have a good chat while we worked.

We bid farewell and made our way over to Colchester. We did have a call planned on the way, but that didn’t transpire for whatever reason, it was only a call in and listen to a car that was ‘sounding like a bag of spanners’.

We made the most of having a couple of hours spare and decided to take in some culture, with a visit to Colchester castle before checking into our digs for the night.

A bright and early start this morning, for another short commute back into Colchester, where it was lovely to see Claire again. We didn’t see her when we serviced the car last time at her parent’s house so it was good to have a catch-up with her.

Claire had noticed an awful noise coming from the engine bay fan, which was on continuously. The reason for it being on all the time was due to a faulty sensor, however the fan itself had become corroded over time. So we had taken a replacement one down with us and fitted that for her, along with a replacement engine bay air temperature sensor that she’d sourced.

Car given a check over for anything else amiss, nearside front track rod end and ball joint had done their time, so we replaced these and packed the front top arms full of grease. Couple of little niggles discussed for Claire to tackle and a couple of things noted that she would like doing on our next visit.

Thanks to everyone for their hospitality and to the sun for finally making an appearance! ☀️ – https://ift.tt/8xdXDpH